Automobile interior trim adhesive is the water based polyurethane resin adhesive used to bond and lamination automobile interior leather and plastics materials . Automobile interior adhesive is used to bond automobile interior including ceiling, seat and floor etc.Antahuatai automobile interior adhesive is an environment-friendly water-based polyurethane resin for automobile interior decoration. The features of antahuatai automobile interior adhesive are as follows:
(1) environmental protection: non-toxic, no pungent smell, only weak aroma.
(2) good fire performance: flame retardant, anti-static.
(3) quick dry, a stick that is closed.
(4) solid content: about 50%, saving 1KG water spray adhesive for big-mouth frog is equal to 2-2.5kg oil spray adhesive.
(5) fog does not melt: it can be sprayed uniformly on the surface of the product without causing smoke in the sky.
An da huatai automobile interior trim adhesive   with correct operation of six steps
Step 1: open the ventilation system on the construction site, open the doors and Windows, and ensure good ventilation on the site.
Step 2: before construction, check whether the spray gun function is normal and remove water from the air pipe.
Step 2: clean the surface of the material without grease, dust or other impurities.
Step 4: spray the nozzle evenly on the material surface;
Linear: nozzle should be 45 degree Angle with material surface;The nozzle distance from the material surface is about 0.2m.Spray gun pressure should be adjusted to the normal requirement of 2 kg;
Fan: the nozzle should be perpendicular to the surface of the material and spray out a uniform fan of glue mist at an Angle of about 45 degrees.
Step 5: evenly spray, place 1-5 minutes before gluing (or the adhesive layer is not stick to the hand).
Step 6: the appropriate pressure when the adhesive, the adhesive effect will be better.

PS:Kindly let me know your spec,I will recommend best one for you