banner
TECHNICALS SHARE
Home

TECHNICALS SHARE

polyurethane resin for textile anti-pilling finishing

polyurethane resin for textile anti-pilling finishing

  • 2019-12-11
1.polyurethane resin for Anti-pilling and pilling mechanism
Pure cotton knitted fabric after boiling, dyeing, finishing and other processing, its surface will produce a lot of wool, together with electrostatic effect, wearing a period of time after the fabric surface will rise and pilling, affect the beauty and comfort.Polyester-cotton blended knitted fabric is in use and washing process, due to continuous friction, pilling phenomenon is serious, so that the feel and appearance of the fabric become poor, affect its performance.Resin finishing is an effective method to improve the fabric anti-pilling.The principle is that the polyurethane resin can be used on the fiber surface to form a film in the form of cross-networking, so that the fiber surface is coated with a layer of wear-resistant resin film, to weaken the slip between the fibers;At the same time, the resin is evenly cross-linked and condensed on the surface of the yarn, so that the fiber end sticks to the yarn, and it is not easy to pilling during friction.Resin finishing can improve the anti-pilling and anti-wrinkle and anti-static properties of the fabric.


2.Finishing process
Dip rolling process: fabric dip rolling (anti-pilling pilling agent 100g/L, one dip and one rolling, 80% residual rate) → pre-drying (100℃, 3min) → baking (130℃, 3min)


3,The research progress
Waterborne polyurethane is used as anti-pilling finish.It USES water-soluble compounds as the protective agent of isocyanate group and is a very stable water-soluble resin.After the resin is applied to the fabric.After heat treatment, the protective agent was separated, and the reactive isocyanate group made the resin itself crosslinked to form a network structure, which lost its water solubility and became a resin film with strong water and solvent resistance.After the fabric is treated with waterborne polyurethane, the pilling phenomenon on the fabric surface is greatly reduced, and the pilling grade is raised from the original 1-2 to above 4, and there is no free formaldehyde release after finishing the fabric.



For any requirements on water based polyurethane resin for textile finishing ,kindly contact us !

© Copyright: Anhui Anda Huatai New Materials Co., Ltd. All Rights Reserved.

top

Leave a message

Leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.